Sharp UX-300 operation manual Telephone line cord, Comments

Connections

Telephone line cord

Insert one end of the line cord into the jack on the back of the machine marked TEL. LINE. Insert the other end into a standard (RJ11C) single-line wall telephone jack.

1. Installation

TEL

SET. TEL

LINE.

Be sure to insert the telephone line cord into the TEL. LINE jack. Do not insert it into the TEL. SET jack!

Comments:

•Your fax is set for touch-tone dialing. If you are on a pulse dial (rotary) line, you must set the fax for pulse dialing by changing Option Setting 8. This procedure is described in Chapter 8, Option Settings.

•If you intend to use a computer fax modem on the same phone line, you must reset Option Setting 12 (Fax Signal Receive) to NO in order to prevent transmission and reception errors. This procedure is described in Chapter 8, Option Settings.

13