Sharp UX-300 operation manual Print, Press these keys

Receiving Documents

Comments:

•Your fax will not accept the signal to begin reception (5**) if a document is loaded in its feeder.

•If you have set Option Setting 12 to NO and hear a fax tone when you answer the extension phone, you must press 5, *, and * if you are on a touch-tone phone, or walk over to the fax, pick up the handset, and press the START/MEMORY key if you are on a pulse dial phone.

•The code used to activate fax reception from a touch-tone extension phone (5**) can be changed if desired. See Option Setting 5 (Tel/Fax Remote Number) in Chapter 8, Option Settings.

2 in 1 Print

To save paper, you can have the size of your incoming faxes reduced by 55%. This will allow you to receive, for example, a 2-page document on one page (note that this may not be possible if the document pages are longer than your printing paper). To turn on this function, follow the steps below.

1 Press these keys: FUNCTION

6

The display will show: 2 IN 1 PRINT

3. Receiving Documents

2 Press 1 to turn on the function, or 2 to turn it off.

YES NO

1 or 2

The display will show:

PRINT CONTRAST

3 Press the STOP key.

STOP

53