Sharp UX-300 operation manual Setting 11 Distinctive Ring, Setting 12 FAX Signal Receive

Option Settings

Setting 11: DISTINCTIVE RING

This sets the ring pattern to which your fax will answer if you subscribe to a distinctive ring service. Enter a number from 1 to 5 to select a pattern. See Distinctive Ring in Chapter 7 for more details.

•Initial setting: 5

FUNCTION		until
4	Press	display DISTINCTIVE RING
		shows:

Enter a number	STOP
	FAX SIGNAL RX
from 1 to 5

Setting 12: FAX SIGNAL RECEIVE

Your fax will automatically begin reception if you hear a high-pitched fax tone after answering a call on your fax or an extension phone. If you use a computer fax modem to send documents on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents from the computer fax modem. Press 1 to turn the function on, or 2 to turn it off.

•Initial setting: 1

FUNCTION		until
4	Press	display FAX SIGNAL RX
		shows:

YES	NO
1 or	2	STOP
		JUNK # CHECK

8. Option Settings

Setting 13: JUNK FAX NUMBER CHECK

Press 1 to prevent reception from fax numbers entered in the Anti Junk Fax List. Press 2 to allow reception from all numbers.

•Initial setting: 2

FUNCTION

until

4 Press display JUNK # CHECK shows:

YES NO

1 or 2

POLLING

STOP

93