Sharp UX-300 operation manual Setting 7 Transaction Report Print Select, Setting 8 Dial Mode

Option Settings

Setting 7: TRANSACTION REPORT PRINT SELECT

This sets the condition for printing out a Transaction Report. Enter a number from 1 to 5 as follows:

1	(ALWAYS PRINT):	A report will be printed after each
		transmission, reception, or error.
2	(ERR/TIMER/MEM): A report will be printed after an error, timer
		operation, or memory operation.
3	(SEND ONLY):	A report will be printed only after a
		transmission.
4	(NEVER PRINT):	A report will never be printed.
5	(ERROR ONLY):	A report will be printed only after an error
		occurs.

•Initial setting: 5

FUNCTION		until
4	Press	display TRANSACTION LIST
		shows:

Enter a number	STOP
	DIAL MODE
from 1 to 5

8. Option Settings

Setting 8: DIAL MODE

This sets the mode of dialing. Press 1 if you are on a touch-tone line, or 2 if you are on a pulse dial line. (If you don’t know which type of line you have, try making phone calls with both settings and see which one works.)

•Initial setting: 1

FUNCTION

until

4 Press display DIAL MODE shows:

TONE PULSE

STOP

1 or 2

QUIET DETECT TM.

91