Sending a Fax by Automatic Dialing
Direct Keypad Dialing
You can also enter a full number with the number keys and then press the START/MEMORY key to begin dialing. You can use this method to dial a full number when you don’t need to speak to the other party before faxing.
1 Load the document(s).
The display will show:
READY TO SEND
• Set the resolution and/or contrast if | RESOLUTION |
desired. |
|
2 Enter the number of the receiving |
| ABC | DEF | |
machine by pressing the number keys. | 1 | 2 | 3 | |
• If a pause is required between any | GHI | JKL | MNO | |
of the digits to access a special | 4 | 5 | 6 | |
service or an outside line, press the | PQRS | TUV | WXYZ | |
7 | 8 | 9 | ||
REDIAL key (two seconds per | ||||
|
|
|
pause). The pause will appear as a hyphen. Several pauses can be entered in a row.
3 Check the display. If the number of the receiving machine shown is correct, press the START/MEMORY key.
• If it is not correct, press the STOP | START/MEMORY |
key to backspace and clear one digit |
|
at a time, and then |
|
correct digit(s). |
|
2. Sending Documents
47
