F;1-
Playback
Inserting a Video Cassette
Gently insert the video cassette into the cassette compartment. The VCR turns on automatically. If the cassette
is inserted incorrectly, the loading system will not function. Do not force the cassette into the VCR. When the
cassette has been properly loaded,
“m”
appears on the VCR display.
To remove the cassette, press EJECT during stop mode.
@
Turn on the VCR. (See page 5, item 3.)
8
Insert a cassette.
@
Press
PLAY/x2.
(The auto tracking control
system engages and
‘IF”
flashes on the TV
screen for a few seconds.)
-
FF
@ To stop playback, press STOP. (If the tape
reaches its end, the VCR will automatically rewind
the tape to the beginning, eject the cassette, and
turn into POWER STANDBY mode.)
NoTE>
l NTSC tapes recorded in Hi-Fi and EP mode may appear
distorted during playback. This does not indicate a
malfunction. The tracking function can be used to slightly
enhance the picture quality.
Video Search
Use the following procedure to quickly find the section you
want, while viewing the picture.
0
During playback, press FF for forward video search, or
REW for reverse search.
Faster
Slower
Video Search Video Search
There are 2 search speeds in each direction. The VCR
switches between them each time the button is pressed.
@
Press PLAY/x2 to resume normal playback.
l During video search of a tape recorded in the LP mode, the upper
part of the picture may be skewed to one side.
Fast Forwarding and Rewinding
0
To move through the cassette faster, press
STOP and then press FF or REW to fast
forward or rewind the cassette. (The picture
cannot be viewed in this mode.)
@ Press STOP to stop fast forward or rewind.
l If you use other than
E-90/E-180
cassettes, fast for-
ward and rewind may take somewhat longer
18