Fl

Editing from a Camcorder to Your VCR

Editing from your Camcorder is extremely easy using your VCR with a linear tape counter, etc. The connection
diagram below is for a guideline only. Refer to your Camcorder Operation Manual for precise connection
information
InLO
IN terminals
-
H
>
’
Ll:
(LINE
IN
li
I
~.
, (Rear)
.
..^V
_-’
, Camcorder
fVIEWCAMI
\
L2
Select Position L2 or
Ll
12:
(LINE IN 2) (Front)
El

Specifications

Format: VHS
PALiNTSC
standard
Video recording system: Two rotary heads, helical scan
Video signal system: PAL/NTSC colour or monochrome (CCIR system B/G) signal
Hi-Fi audio recording system: Deep-layer recording system conforming to stereo Hi-Fi VHS standard
Maximum playing time: 480 minutes max. with E-240 tape (PAL)
480 minutes max. with T-160 tape (NTSC)
Tape width: 12.7 mm
Tape speed: PAL : 23.39 mmisec. (SP) 11.70 mmisec. (LP)
NTSC: 33.35 mmisec. (SP) , 16.67 mm/set. (LP: Playback only) ,
11 .I2
mm/set.
(EP)
Antenna: 75 Ohm unbalanced
Reception channels: VHF channel 0 to 12, UHF channel 28 to 69
RF output signal: UHF channel 28 to UHF channel 69 (preset to UHF channel 37)
Power requirement: AC 240 V, 50 Hz
Power consumption: 17 W
(approx.)/l
.O W Max (at Low Power Mode)
Operating temperature: 5°C to 40°C
Storage temperature:
-
20°C to 55°C
Video input: 1 .O Vp-p, 75 Ohm
output: 1 .O Vp-p, 75 Ohm
Audio input: (phono type) Line:
-8dBs,
47 kohm
output: (phono type) Line: -8dBs (approx
),
1 kohm
Hi-Fi audio: Dynamic range: Typically 85
d!3
Frequency response: 20 Hz-20
kHz
Wow and flutter: less than 0.005% Wrm
Dimensions: 360 (W) x 256 (D) x 92 (H) mm
Weight: 3.0 kg
Supplied accessories: R6 (AA,
UMISUM-3)
battery x 2
75.ohm
coaxial cable, operation manual, remote control unit
Design and specifications are subject to change without notice.
38