!!ii Connections
@ Disconnecting TV Cable
Disconnect the aerial cable from the back of your TV set.
0 Connecting Aerial Cable to VCR
Connect the aerial cable to the ANTENNA IN terminal of your VCR.
0 Connecting VCR to TV
Connect the supplied coaxial cable to the RF OUT terminal of the VCR. Plug the other end into your TV’s ANTENNA IN terminal.
Connecting to a Stereo TV
ANTENNA IN
ANTENNA IN
TV back panel
RF OUT
From VIDEO OUT
AUDIO OUT R/L
To AUDIO IN R/L
A IN
iNoTE
•Stereo sound output is only possible using the AUDIO OUT terminals. Sound from the radio frequency converter (RF OUT) is mono only.
•The power cord should not be plugged into the power outlet until the above connections have been completed.
•If TV reception is weak, use a TV signal booster (not supplied).
!M Connecting to TV and Audio Equipment
From RF OUT
From VIDEO OUT From AUDIO OUT R/L
1 | To VIDEO IN | 1 |
|
|
9
