m Programming the Timer with G-COD?
A
-n-i
This VCR has the G-CODE Programming System. By simpiy inputting the
b&uut
nurmber
with the
O-9
numeric
buttons, you can programme your VCR for timer recording.
The G-CODE numbers are listed in most newspaper, TV guide, and local cable TV listings.
The timer can be set for automatic recording of up to 8 events over a
365day
period. In addition, each of the
events can be set to be recorded on a daily or weekly basis up to the limit of the tape.
PREPARATION:
l Select the video channel on your TV. Turn on the VCR. (See page 5,
Item
3.)
l
Load the cassette, ensuring the erasure protection hole is covered. The VCR power will automatically turn
on.
l Check that the clock is displaying the correct time.
CODE number, refer to your newspaper or TV guide
ODE to directly select this screen.
@ If you want to record only once, press SET and g
step
0.
Otherwise, press
A
or
7
to select daily/we
setting mode, and then select “DAILY” or “WEEKLY
pressing
4,.
And then press SET.
To record only once.
To record every day at the same time.
“WEEKLY”:
To record every week at the same time.
nto.
.iv.
SP,I,P.EP:TAPE
SPEED
l
SP,
Standard
Play
,
,:SELECT
*.
:CH*LNGE
SET:ENTER
MEN”:EXI
* EP: Extended Play
(only NTSC Tape) J
Continued on next page
27