Sharp VC-H680X operation manual New Child-Proof Lock

m New Child-Proof Lock

With this feature, you can lock all VCR modes to prevent accidental change.

633 This function works even when the VCR power is off, thus preventing children from

0 operating the VCR or viewing select programmes while you are away from home.

:

New Child-Proof Lock

0Press ti on the remote control for about 2 seconds. “@=a”flashes and “;:---lights” on the VCR-function display

@ Press ti again.

“ti”remains lit on the VCR display confirming that New Child-Proof Lock has been activated.

@Now regardless of what other operating buttons are touched, the VCR will continue to operate in the present

ri:w Child-Proof Lock is activated during playback, once the tape reaches its end, the VCR automatically rewinds the tape, ejects it, and turns into POWER STANDBY mode.)

Disengaging New Child-Proof Lock

•Press h for about 2 seconds.

“ti”starts flashing and then disappears. Now, New Child-Proof Lock is disengaged.

Advanced New Child-Proof Lock

Press ti on the remote control for about 2 seconds. “ti”flashes and “I<---‘Ilights on the VCR display.

Input the personal code number (4 digit code) with the numbered buttons. The personal code number you have input is displayed on the VCR display.

Press ti again.

“ti”remains lit on the VCR display confirming that New Child-Proof Lock has been activated.

Now regardless of what other operating buttons are touched, the VCR will continue to operate in the present mode.

(If New Child-Proof Lock is activated during playback, once the tape reaches its end, the VCR automatically rewinds the tape, ejects it, and turns into POWER STANDBY mode.)

Disengaging Advanced New Child-Proof Lock

0 Press ti for about 2 seconds.

“ti”flashes and “:‘;:---lights” on the VCR display.

Q Input the personal code number (4 digit code) you used to activate Advanced New Child-Proof Lock with the numbered buttons. The personal code number you have input is displayed on the VCR display.

0 Press ti again.

“G=J”disappears. Now, New Child-Proof Lock is disengaged. If the code number is wrong, ‘I:<---” is displayed on the VCR display. Retry to input the right code number. Press h again.

If you forget your personal code number, you can disengage New Child-Proof Lock with the following procedure:

0 Press ti for about 2 seconds.

“ti”flashes and “:K---”lights on the VCR display.

@Press STANDBY on both the VCR and remote control for at least 2 seconds. New Child-Proof Lock is disengaged

•If, while New Child-Proof Lock is on, you attempt to change modes by pressing another button, the “ti”indicator will flash on the VCR display.

35