18.7.99

kap05.fm5

Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-

Incoming calls

External call-waiting during internal calls

x ACCEPT

or

a

c

Ending a call

The call waiting beep signals an external call while an in- ternal call is in progress. Your internal connection is cleared down if you accept the external call. The external call is signalled on the display:

:

EXTERN INTERN

2

ACCEPT

You accept the external call immediately.

Disconnect the internal call. You will hear the ring tone.

Accept the external call.

Replace the handset in the base station or charging unit.

The line is disconnected.

or

Clear down the connection.

a

If the handset was in protected mode, it re- mains in this mode after you press a.

Deactivating the microphone (mute function)

uINT

R

You can deactivate the microphone while an external call is in progress. This allows you to consult other people in the room while the external party is on hold. The external party cannot what you are saying and will hear music.

Set up a connection.

The microphone is deactivated. Hold consultation with people in the room.

Activate the microphone. You are reconnected with the external party.

16

Page 27
Image 27
Siemens 2011 operating instructions Incoming calls External call-waiting during internal calls, Ending a call