Siemens 2011 Short cuts Starting a short cut, Default short cuts, T Start, T DefaultShortCuts

18.7.99 kap17a.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-

Short cuts

Starting a short cut

If one or more short cuts have been created, you can se- lect them and start them when you are both off-line and on-line (after pressing the Talk key).

(tmeans: scroll with u Z, confirm with x OK )

.t Short Cut

x Z

uW t Start

Default short cuts

Select the desired short cut from the list and call up the Start menu option.

The active status is shown on the display until the short cut is executed. A typical message would read "Shortcut active: unit check".

The display message will only be interrupted if, for exam- ple, the user is requested to enter the PIN.

A list of default (system) short cuts is already loaded in your short cuts list. The list contains the following short cuts:

Name	Sequence	Meaning
Total units	S#83C*BS	Check total call charges for all handsets
Unit check	S#22BS	Check call allowance account
Call Barring off	S#84CB0S	Switch off call barring
Call Barring on	S#84CB1S	Switch on call barring
Base lock	S#24CBS	Switch base lock on/off
Base Tone Ringer	S#*6BS	Change base ringer volume
Base Ringer Vol.	S#*5BS	Change base tone ringer

(tmeans: scroll with u Z, confirm with x OK )

.t Short Cut

u W t DefaultShortCuts

All of the default short cuts can be loaded into the short cuts list by pressing LOAD . You can quit the procedure by pressing CANCEL . The system short cuts are arranged in alphabetical order in an existing short cuts list.

83