Short cuts
78
kap17a.fm5
18.7.99 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
New entry
To create a short cut, call up the short cut function in the
main menu. If no short cut has previously been created,
the short cut list will contain a broken line. You can create
a new short cut using the New Entry option in the short
cut menu.
(
t
means: scroll with
u
,
confirm with
x
)
Z
OK
When you select New Entry you can access a one-line
Name field and a two-line Contents field. First give the
new short cut a name.
Entries for a short cut follow the rules described in the
chapter “Input function“ ➔page 37.
Function list
To make it possible to enter short cut elements (special
characters) in the Content field in addition to digits, call up
the Insert Function option in the additional menu.
A list of functions is displayed from which you can
choose. Each function which can occur in a command line
is presented in this list as plain text. The available func-
tions and their meanings are explained in the following ta-
ble.
In order to create the "Unit check" short cut, the special
characters "C*BS" for Request PIN Code, Display base
messages and SET Key are necessary. As these charac-
ters cannot be entered in the Contents field with the key-
board, they must be obtained from the function list.
.tShort Cut utNew Entry
W
utInsert Function
W
Function Display
Request PIN Code C
Request Number N
Insert Pause P
Request Acknowl. Q
Base Prompt B
INT Key I
SET Key S
Redial Key W
End Call E
TempSwitchToTone M