Siemens 2011 Operating more than one handset, Call allocation for incoming calls

18.7.99 kap16.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-

Operating more than one handset

Operating more than one handset

Call allocation for incoming calls

Collective call group

Call group 1 Call group 2

Call group 1 Call group 2

It is possible to set how incoming calls should be signalled when operating several handsets. A distinction is made between:

●Collective call (factory default) – incoming calls are signalled to all registered handsets.

You can exclude individual handsets from the collec- tive call group and reintegrate previously excluded handsets.

●Ring priority – incoming calls are first signalled at a preferred (prioritised) handset. If this party does not accept the call, the system automatically forwards it to the handsets assigned to the collective call group after an defined number of rings.

You can define which handset is assigned to the first group and which are assigned to the second group. Extensions that are not entered are excluded from ring priority.

Switching between collective call and ring priority

t

.

Service

(tmeans: scroll with u Z, confirm with x OK )

Activate the “Service” menu item.

#1

Start the setting procedure.

oEnter the four-digit base code (factory default:”0000“) (➔ page 43).

xREDIAL

The current setting is shown on the display:

:23

:

*23	1
	SET
SET		REDIAL

1u		Set collective call.
	SET
	or
2u		Set ring priority.
	SET

(Example:1 = collective call is set)

71