Siemens 2011 Search for a call number in the list Delete the entry, Switch to Tone

18.7.99 kap06.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-

External outgoing calls

Deleting a callback party from the call list

Display after activating the call list.

Change to the second dis-

*play line of the entry. In this example, there were three calls to this number and one callback attempt.

089722244667

P f N b F

u3

P f N b F

Search for a call number in the list.

#

Delete the entry.

0

Controlling devices with dual-tone multifrequency signalling (DTMF)

.

t Switch to Tone

Your telephone must be set to dual-tone multifrequency signalling (DTMF) for certain connections, for example, if you want to check an answering machine or a voice in- fobox or avail of telecom services such as CityRuf or Scall (paging services available in Germany).

If your Gigaset 2011 is connected to a line with DTMF sig- nalling, every connection is automatically set up using DTMF signalling mode. If this is the case, you do need the function to switch to DTMF signalling.

If the device is connected to a line with dial pulsing (DP), you can switch to DTMF signalling once the connection has been set up.

You can check which signalling method is set if you are un- sure (➔ page 13). DTMF signalling is set by default.

Prerequisite: an external connection exists.

(tmeans: scroll with u Z, confirm with x OK )

Activate temporary DTMF via the menu.

Once you have switched to DTMF, you can switch between the two signalling methods during the connection using the R recall key. When the line is disconnected, the telephone will automatically return to the original signalling method.

Any digits or symbols that you enter after switching signalling methods are not copied to the redial memory.

23