Siemens 2011 operating instructions Analog trunks, Entering the analog trunk and the MSI Service

18.7.99 kap09.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-

Important basic settings

Analog trunks

For operating your Gigatset 2011 in a telephone system for through connection to the public telephone network you must set:

●the analog trunk

●the pause length after the analog trunk (if a pause is necessary after entry of the analog trunk)

If the telephone system is connected as a subsystem to a main system, you must set the:

●the analog trunk

●the MSI

●the pause length after the analog trunk/MSI

For the pause length to be entered after the an- alog trunk/MSI, please consult the documenta- tion supplied with your telephone system.

Entering the analog trunk and the MSI

.

t Service

#@

o

x REDIAL

or

x REDIAL x REDIAL

o

The analog trunk and MSI have one to three characters and can comprise the digits @to 6 and the :, #, and R keys.

(tmeans: scroll with u Z, confirm with x OK )

Activate the Service menu item

Start the setting procedure.

Enter the four-digit base code (factory default: “0000“) (➔ page 43).

Select the analog trunk.

Select the MSI.

Enter the analog trunk or the MSI. If more than one ana- log trunk or MSI is available, you can enter the next analog trunk/MSI by pressing u REDIAL .

u		Save the setting.
	SET

48