Siemens 2011 Registering a Gigaset 2000C handset at a base station, X Ok, Settings t Register

18.7.99 kap15.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-

Registering/de-registering more than one handset at the base station

Registering/de-registering more than one handset at the base station

You can operate up to six handsets of the types Gigaset 2000S and/or Gigaset 2000C or Gigaset 2000T as well as the Gigaset 1000TAE cordless socket at a Gigaset 2011 base station.

The standard Gigaset 2000C handset supplied is already registered at the base station with the internal call number 1 and base number 1.

Each additional handset that you purchase must be regis- tered at the base station. We recommend that you keep the base number 1 for this base station when registering other handsets at the base station.

Registering a Gigaset 2000C handset at a base station

If you want to operate your handset at more than one base station (up to six) (➔ page 71), you must repeat the following procedure at each base station.

(tmeans: scroll with u Z, confirm with x OK )

.t Settings t Register

u Z x OK

The available base stations are displayed (1 to 6). Select a base station (recommendation: Base 1)

Prepare the base station

Base 1

Base 2

Base 3

Y Z{ W

Press the green paging key on the base station until you

?hear the logon tone (after approximately ten seconds).

xOK

o

2… 6

Register the handset

Enter the four-digit base tele- phone base code and confirm (fac- tory default: "0000"). The handset is now registered at the base sta- tion.

The unassigned internal numbers are displayed. Use the dialling key- pad to select one of these num- bers as the handset number.

Enter

base code:

* *_

Y ZX OK

2 3 4 5 6

69