Administration

Transferring Phone Software, Application and Media Files

3.10.8Screensaver

The screensaver is displayed when the phone is in idle mode. It performs a slide show consist- ing of images which can be uploaded using the web interface.

>Screensavers are available only on OpenStage 60/80 phones.

For screensaver images, the following specifications are valid:

Data format: JPG or PNG. JPG is recommended.

Screen format: 4:3. The images are resized to fit in the screen, so that images with a width/ height ratio differing from 4:3 will appear with deviant proportions.

Resolution: The phone’s screen resolution is the best choice for image resolution:

OpenStage 60: 320x240

OpenStage 80: 640x480

3.10.8.1FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set- tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec- ified.

Data required (in every case)

Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-

ue range: "Yes", "No".

Default: "No".

Filename: Specifies the file name of the phone software.

Data required (if not derived from Defaults)

Download method: Selects the protocol to be used.

Value range: "FTP", "HTTPS".

Default: "FTP".

Server address: IP address or hostname of the FTP/HTTPS server in use.

Server port: Port number of the FTP/HTTPS server in use.

Default: 21.

FTP account: Account at the server (if applicable).

FTP username: User name for accessing the server.

FTP password: Password corresponding to the user name.

FTP path: Path of the directory containing the files.

3-96

A31003-O1010-M100-9-76A9, 05/05/2008

HiPath 8000 - OpenStage Family, Administration Manual

Page 138
Image 138
Siemens 40, 80, 60, 20 manual Screensaver, 10.8.1 FTP/HTTPS Access Data