Siemens 20, 80, 60, 40 manual Manual configuration of a Vlan ID

Administration

LAN Settings

3.2.2.2Manual configuration of a VLAN ID

To configure layer 2 VLAN and QoS manually, first make shure that QoS layer 2 and 3 are con- figured as described in Section 3.3.1, “Quality of Service (QoS)”, and VLAN discovery is set to "Manual" (see Section 3.2.2.1, “Automatic VLAN discovery (DHCP)”). Then, the phone must be provided with a VLAN ID between 1 and 4095. If you mis-configure a phone to an incorrect VLAN, the phone will possibly not connect to the network. In DHCP mode it will behave as though the DHCP server cannot be found, in fixed IP mode no server connections will be pos- sible.

Administration via WBM

Network > IP configuration

Administration via Local Phone

---Administration

---Network

---IP Configuration

---VLAN ID

A31003-O1010-M100-9-76A9, 05/05/2008	3-9
HiPath 8000 - OpenStage Family, Administration Manual