Siemens 60, 80, 40, 20 manual Connecting the Phone, Model Power Consumption/Supply

Startup

Assembling and Installing the Phone

2.2.4Connecting the Phone

1.Plug the LAN cable into the connector at the bottom of the telephone and connect the cable to the LAN resp. switch. If PoE (Power over Ethernet) is to be used, the PSE (Power Sourcing Equipment) must meet the IEEE 802.3af specification.

For details about the required power supply, see the following table:

	Model	Power Consumption/Supply
	OpenStage 20	Power Class 1
	OpenStage 20 G	Power Class 2
	OpenStage 401	Power Class 2
	OpenStage 40 + 2nd Key Module	Power Class 3
	OpenStage 40 G1	Power Class 3
	OpenStage 40 G + 2nd Key Module	External power unit required
	OpenStage 60/802	Power Class 3
	OpenStage 60/80 + 2nd Key Module	Power Class 3
	OpenStage 60/80 G2	Power Class 3
	OpenStage 60/80 G + 2nd Key Module	External power unit required
Tabelle 2-1

1Includes 1 Key Module.

2Includes 1 Key Module + USB-Extension with Acoustic Unit.

2.Only if Power over Ethernet (PoE) is NOT supported:

Use only the plug-in power supply unit fitting the OpenStage phone:

7 EU: C39280-Z4-C510 UK: C39280-Z4-C512 USA: C39280-Z4-C511

Plug the power supply unit into the mains. Connect the plug-in power supply unit to the jack at the bottom of the phone.

A31003-O1010-M100-9-76A9, 05/05/2008	2-5
HiPath 8000 - OpenStage Family, Administration Manual