Siemens 20 SIP Connection and Communication, Response Timer, Response timer ms Connectivity Check

Administration

System Settings

3.5.7SIP Connection and Communication

3.5.7.1Response Timer

The Response timer is started whenever the phone sends a new message to the SIP server. If the timer expires before the phone gets a response from the SIP server, the phone assumes that the server had died and then attempts to contact the backup server, if configured. If there is no backup server configured, the phone just tidies up internally.

The data is given in milliseconds. The default value is 32 000; for the HiPath 8000, the recom- mended setting is 3.7 seconds (3700 ms).

Administration via WBM

System > SIP interface

Administration via Local Phone

---Administration

---System

---SIP Interface

---Response timer (ms)

3.5.7.2Connectivity Check

A regular check ensures that the TLS link is active. When the Connectivity check timer is set to a non-zero value, test messages will be sent at the defined interval. If the link is found to be dead, the phone searches for another links.

Administration via WBM

System > SIP interface

A31003-O1010-M100-9-76A9, 05/05/2008	3-37
HiPath 8000 - OpenStage Family, Administration Manual