Startup
Quick Start
2.3Quick Start
This section describes a typical case: the setup of an OpenStage endpoint in an environment using a DHCP server and the web interface. For different scenarios,
>Plug & Play functionality allows to provide the phone with configuration data by as- signing an existing data profile to the phone’s MAC address or E.164 number. For further information, see the Deployment Service Administration Manual.
Any settings made by a DHCP server are not configurable by other configuration
>tools.
2.3.1Access the Web Interface (WBM)Alternatively, the DLS (Deployment Service) administration tool can be used. Its
1.Open your web browser (MS Internet Explorer or Firefox) and enter the transfer protocol, IP address and port number of your phone. If HTTP is used, port 8085 must be added, for example http://192.168.1.15:8085. For HTTPS, the phone uses the standard port 443.
After entering the URL, the browser might display a certificate notification. The start page of the web interface appears. In the upper right corner, the phone number, the phone’s IP address, as well as the DNS name assigned to the phone are displayed. The left corner contains the user menu tree.
HiPath 8000 - OpenStage Family, Administration Manual |