Administration
Transferring Phone Software, Application and Media Files
3.10.9Ringer File
Custom Ringtones can be uploaded to the phone. The following file formats are supported:
•WAV format. The recommended specifications are:
•Audio format: PCM
•Bitrate: 16 kB/sec
•Sampling rate: 8 kHz
•Quantization level: 16 bit
•MIDI format.
•MP3 format (OpenStage 60/80 only). The OpenStage 60/80 phones are able to play MP3 files from 32 kbit/s up to 320 kbit/s. As the memory for user data is limited to 8 MB, a con- stant bitrate of 48 kbit/sec to 112 kbit/s and a length of max. 1 minute is recommended.
Although the phone software can play stereo files, mono files are recommended, as the phone has only 1 loudspeaker.
See the following table for estimated file size (mono files):
Length | 64 kbit/s | 80 kbit/s | 96 kbit/s | 112 kbit/s |
|
|
|
|
|
0:15 min | 0,12 MB | 0,15 MB | 0,18 MB | 0,21 MB |
|
|
|
|
|
0:30 min | 0,23 MB | 0,29 MB | 0,35 MB | 0,41 MB |
|
|
|
|
|
0:45 min | 0,35 MB | 0,44 MB | 0,53 MB | 0,62 MB |
|
|
|
|
|
1:00 min | 0,47 MB | 0,59 MB | 0,70 MB | 0,82 MB |
|
|
|
|
|
Tabelle |
|
|
|
|
3.10.9.1FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.10.2, “Common FTP/HTTPS Set- tings”) are to be used, Use default must be set to "Yes", and only the Filename must be spec- ified.
Data required (in every case)
•Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
•Filename: Specifies the file name of the phone software.
HiPath 8000 - OpenStage Family, Administration Manual |