Administration

Features - Configuration

3.6.3Call Transfer

3.6.3.1Transfer on Ring

If this function is active, a call can be transferred after the user has dialled the third participant’s number, but before the third party has answered the call. This feature is enabled or disabled in the User menu. The default is "Yes".

Administration via WBM

(User) Configuration > Outgoing calls

Administration via Local Phone

--- User

---Configuration

---Outgoing calls

---Transfer on ring

3.6.3.2Transfer on Hangup

This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled, and A goes on-hook, B gets connected to C.

If Transfer on hangup is disabled, C will be released when A hangs up, and A has the possibility to reconnect to B.

The default is "No".

3-50

A31003-O1010-M100-9-76A9, 05/05/2008

HiPath 8000 - OpenStage Family, Administration Manual

Page 92
Image 92
Siemens 80, 60, 40, 20 manual Call Transfer, Transfer on Ring, Transfer on ring Transfer on Hangup