14.8.98

KAP02.FM5

Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619

Stepwise startup

Step 6: Check signaling method

Telephone lines can use the following signaling methods:

dial pulsing (DP)

dual-tone multifrequency signaling (DTMF) The factory default for your Gigaset 2010 is DTMF.

Checking your own telephone’s signalling method

Press the off-hook key (corresponds to picking up the

chandset on an ordinary phone). You will hear the dial tone.

Press any digit, e.g. 2. If you can still hear the dial tone

o

you will have to set the signaling method to dial pulsing (DP).

Setting the phone to dial pulsing (DP)

B#1 Start the setting procedure.

Enter the four-digit base code (factory default:”0000“)

o(page 19).

O033B Set dial pulsing (DP).

The other signaling method settings are inten- ded for the operation of the Gigaset 2010 in telephone systems (page 17 ).

You can now make external calls with your Gigaset 2010.

4

Page 14
Image 14
Siemens Gigaset 2010 Stepwise startup Check signaling method, Checking your own telephone’s signalling method