Siemens Gigaset 2010 Dialing a DSS number from a locked handset, Ending a call

14.8.98 KAP06.FM5 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

External outgoing calls

Device control using dual-tone multifrequency signaling (DTMF)

If your telepone is connected to a line with dial pulsing (DP), you can switch to dual-tone multifrequency signaling (DTMF) once the connection has been set up.

Precondition: an external connection exists.

B* Select and confirm.

When you have switched to DTMF, you can switch between the two signaling methods dur- ing the connection using the R signal key. When the line is disconnected, the telephone will automatically return to the original signaling method.

Any digits or symbols that you enter after swit- ching signaling methods are not stored in the memory for redialing.

Dialing a DSS number from a locked handset

If the handset has been locked for external calls

(➔ page 46) and a DSS number is stored (➔ page 46), it is possible to dial this direct number despite the lock.

Press any key on the handset. The direct number is

o

dialed.

It is not possible to dial a DSS number from a locked handset,

● if “unrestricted trunk access or outward re- stricted trunk access“ is set (➔ page 45), or

● if the base station is locked (➔ page 41).

Ending a call

Replace the handset in the loading unit. The line is dis- connected.

or

Disconnect (on-hook key).

a

27