18.11.98

Kap03.fm5

Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619

Notes on operation

Technical data

Standard: DECT = Digital Enhanced Cordless Telecommunications GAP = Generic Access Profile (standard adhered to

by most manufacturers for DECT radio trans- mission)

Number of channels:

Radio frequency range:

Duplex method:

Channel grid:

Bit rate:

Modulation:

Voice coding:

Transmitted power:

Range:

Base station power supply:

Base station power consumption:

Handset operating times (with fully charged battery):

In standby mode with NiCd NiMH, 1100 mAh NiMH, 1300 mAh

When the telephone is in use with NiCd with NiMH, 1100 mAh

with NiMH, 1300 mAh

Charging time in base station:

120 duplex channels

1880 MHz to 1900 MHz

Time-division multiplexing, 10 ms frame length

1728 kHz

1152 kbit/s

GFSK

32 kbit/s

10 mW, average output per channel

up to 300 m outdoors, up to 50 m in buildings

220/230V (AC adapter)

In standby mode and when the telephone is in use ap- prox. 3 W, during charging approx. 5 W

up to 70 hours up to 110 hours up to 130 hours

up to 7 hours up to 11 hours up to 13 hours

NiCd rechargeable batteries (approx. 4–5 hours) NiMH rechargeable batteries, 1100 mAh (approx. 8–9 hours)

Permitted ambient conditions

+5 °C to +45 °C

for operation:

20 % to 75 % relative humidity

Signaling method:

DP (dial pulsing) / DTMF (dual tone multifrequency)

Signal key function:

Flash

Base station dimensions:

approx. 146 x 117 x 70 mm (L x W x H)

Handset dimensions:

approx. 160 × 55 × 25 mm (L × W × H)

9

Page 19
Image 19
Siemens Gigaset 2010 operating instructions Technical data, Gfsk