14.8.98

KAP06.FM5

Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

Manually inserting a pause

oOo

No answer or line busy

External outgoing calls

If you repeatedly get the busy symbol following automatic dialing from the telephone directory, e.g. after the country code, you can enter a pause (three seconds), e.g. bet- ween the exchange or country code and the call number:

Press the O key. “P“ is shown on the display.

:

0043P123456

fN b F

or

a

Replace the handset in the base station or charging unit. The call is disconnected.

Disconnect call (“on-hook“).

You can use the redial function to repeat this call.

Redial

Repeating the last number dialed

You can call up a list with numbers for redial by pressing the O key. You will be presented with a list of the last numbers you called.

OSelect the desired call number.

cPress the off-hook key. The number is dialed.

Redialling one of the last five numbers selected

Your Gigaset 2010 memorises the last five numbers dialled. You can dial these five numbers without having to re-enter them or you can correct them with the Qkey.

Keep pressing the key until the required number appears

O

on the display of the mobile unit.

QPress theQkey to correct the number if necessary.

The number is dialled. Ringing tone is then heard.

c

25

Page 35
Image 35
Siemens Gigaset 2010 No answer or line busy External outgoing calls, Redial, Manually inserting a pause