14.8.98 | KAP02.FM5 | Gigaset 2010, UEB/engl.: |
Stepwise startup
Step 4: Inserting the batteries into the handset
The handset is powered by two batteries.
Batt. compartment cover
Batt. comp. and batteries
Hold the handset with the keypad side facing down.
Slot the batteries into the battery compartment.
Make sure that the +/– battery poles are aligned correctly. The +/– marks on the plate must be aligned with the +/– marks on the batteries.
The handset will not work if the batteries are in- correctly inserted and it may be damaged.
Slide the cover of the battery compartment from above into the grooves in the handset and close the compart- ment.
Step 5: Charging the batteries
To charge the batteries, place the handset in the handset rest on the base station. The charging contacts on the bot- tom of the handset must come into contact with the bot- tom of the base station and its charging contacts. It does not matter whether the keypad is facing up or down.
If you have correctly inserted the mobile unit for charging, the LED under the battery symbol on the base station will light up.
You must charge the batteries before you can make any calls or settings. We recommend that the batteries be charged for 16 hours without in- terruption, e.g. overnight, for the initial startup.
For more information on the use of the batteries (➔ page 6).
3
