Siemens Gigaset 2010 External outgoing calls, Calling external subscribers, FN b F

14.8.98 KAP06.FM5 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

External outgoing calls

External outgoing calls

Calling external subscribers

cPress the off-hook key. You will hear the dial tone.

Enter the desired call number on the dialling keypad. The

onumber you have entered is shown on the display, e.g.:

:

123456

fN b F

You will hear the ring tone.

Dialing with call number checking (en-bloc dialing)

En-bloc dialing allows you to check the external call num- ber entered before it is dialed and correct it, if necessary, using theQkey before the line is seized.

The maximum length of call numbers that you can enter is 22 digits.

Enter the desired call number. The number you have

oentered is shown on the display, e.g.:

:

123456

fN

QYou can correct the number entered using the Qkey.

Press the off-hook key within 30 seconds to seize the

c

line. The call number is dialed. You will then hear the ring tone.

or

You can also leave the dialing mode without dialing by

apressing the on-hook key.

24