14.8.98

KAP15.FM5

Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

Registering/de-registering more than one handsets at the base station

Registering/de-registering more than one handsets at the base station

You can operate up to six handsets from the Gigaset 2000 family at a Gigaset 2010 base station.

You can only register handsets from the Gigaset family. It is not possible to register other Giga- set handsets.

The handset supplied with your telephone is already re- gistered at the base station with the internal call number 1 and base number 1.

Each additional handset that you purchase must be regi- stered at the base station. We recommend that when you are registering other handsets at the base station, to keep the base number 1 for this base station.

Registering a Gigaset 2000S handset at a base station

If you want to operate your handset at more than one base station (up to six) (page 51), you must repeat the following procedure at each base station.

The handset must be turned off (page 15)

Prepare the base station

Press the base station paging key until you hear the logon

?tone (after approximately ten seconds).

1or 2,3,4

h

Register the handset

The handset is off. Press number of base station. Press also this key. The handset is on.

Examples: Registering

Registering at a base station Press 1and h.

Station number

1

fN

Registering at a 2nd base station Press 2 and h.

49

Page 59
Image 59
Siemens Gigaset 2010 Registering a Gigaset 2000S handset at a base station, Prepare the base station, Register the handset