Operating more than one handset

51
KAP16.FM5
14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Operating more than one handset

Ring priority for incoming calls

It is possible to set how incoming calls should be signaled
when operating several handsets. A distinction is made
between:
●Collective call (factory default) – incoming calls are
signaled to all registered handsets.
You can exclude individual handsets from the collec-
tive call and reintegrate previously excluded hand-
sets.
●Ring priority – an incoming external call is first signa-
led to a prioritized handset. If this party does not ac-
cept the call, the system automatically switches to
“collective call” after an adjustable number of rings.
Switching between collective ringing and ring priority
B # 1 Start the setting procedure.
oEnter the four-digit base code (factory default:”0000“)
(➔page 19).
O * 2 3 The current setting is shown on the display
:
1BSet collective ringing.
or
2BSet ring priority.
n
231
P
f

N

b
(Example:
1
= collective
ringing is set)