Siemens Gigaset 2010 Lock functions on the handset, DSS number for handset lock

14.8.98 KAP14.FM5 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

Lock functions on the handset

Lock functions on the handset

Activating/deactivating the handset lock

B81

or

B80

o

You can lock your handset for outgoing external calls to protect it against unauthorized use.

If a DSS number is stored on the handset, it can still be dialed if the lock function is on. A preprogramed emergen- cy number (➔ page 41) can also be dialed when the hand- set is locked.

A DSS number must be stored before acti- vating the handset lock.

It is possible to accept calls on a locked handset.

Start procedure for switching on the lock.

Start procedure for switching off the lock.

Enter the handset PIN (factory default “0000 “). (➔ page 20).

BSwitch the handset lock on or off. If the handset is locked, you will see a key on the display.

You can lock the Gigaset 2010 for outgoing ex- ternal calls (➔ page 41).

DSS number for handset lock

You can store one DSS number which can be dialed when the handset is locked. The DSS number can be a number where you can be reached in your absence.

The DSS number must not be the same as a barred number (➔ page 41).

The DSS number cannot be dialed from a locked handset,

● if “outward-restricted trunk access” is set (➔ page 45), or

● if the Gigaset 2010 lock is activated (➔ page 45).

● If the Gigaset 2010 lock is activated, it is only possible to dial emergency numbers. Exception: DSS number = emergency number.

46