Operating modes
19
KAP04.FM5
14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Modify the pause length according to the excharge code
Possible pause lengths are:
1 second
2 seconds
3 seconds (factory default)
6 seconds
Deleting the exchange code
Changing the system code, changing the PIN
To protect your personal settings, Gigaset 2010 has two
code numbers, a four-digit system code and an eight-digit
handset PIN (personal identification number). The factory
defaults are as follows:
●System code : "0000"
●Handset PIN : "0000"
You need to know the system code in order to create ba-
sic settings or to lock the telephone for outgoing calls.
The system code can thus be described as the main code
for your Gigaset 2010 telephone.
The PIN primarily protects settings on your handset(s),
but it has no effect on the basic functions of the base sta-
tion. For security reasons, a new system code and a new
PIN should be entered.
If several handsets are operated (➔page 51), the same
system code is valid for each one.
B # 1 Start the setting procedure.
oEnter the four-digit base code (factory default: “0000“)
(➔page 19).
O 0 2 4BSelect pause length of 1 second.
or
O 0 2 5BSelect pause length of 2 seconds.
or
O 0 2 0BSelect pause length of 3 seconds (factory default).
or
O 0 2 1BSelect pause length of 6 seconds.
B # 1 Start the setting procedure.
oEnter the four-digit base code (factory default: “0000“)
(➔page 19).
O 2 5 3BDelete exchange code.