14.8.98

Kap10.fm5

Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619

Individual settings on the Gigaset 2000S mobile unit

Speed dial numbers

You can store speed dialling numbers for frequently re- quired external numbers. These speed dialling codes can then be used for calling outside numbers (page 26).

You can store 10 call numbers as speed dial numbers.

Each speed dial number can consist of up to 22 digits and can include numbers as well as the pound, star and signal keys, and manual “dial pause”.If you enter longer call numbers, only the first 22 digits will be stored.

You can also handle speed dial numbers during a call.

Checking or store speed dial numbers

BQ

You can call up the memory configuration of the speed dial numbers on the display. You can assign external tele- phone numbers to the speed dial numbers shown.

Start setting procedure.

Select a speed dial number: Press a digit from 0 to 9. The

oselected speed dial number is displayed on the screen of the handset, followed by the memory contents.

:

3 z

PfN

(Example: speed dial no. 3 is unassigned)

:

0 123456

PfN

BAcknowledge the display.

or

(Example: speed dial no. 0 is assigned to 123456)

oEnter new call number. Any old call number will be over- written.

With this key you can correct or delete the entered call

Qnumber.

BPress to store the call number.

38

Page 48
Image 48
Siemens Gigaset 2010 operating instructions Checking or store speed dial numbers