14.8.98 | KAP16.FM5 | Gigaset 2010, UEB/engl.: |
Operating more than one handset
Excluding or reintegrating a handset from/into collective ringing
B#1 Start the setting procedure.
Enter the
o(➔ page 19).
O*21
oB
The current setting is shown on the display. handsets which are in collective ringing mode are indicated by their internal call numbers and excluded handsets are indica- ted by a space:
: |
|
| (Example 1: handsets1, | |
| n21 | 1234 | ||
| P f N | b | 2,3,4 are in coll. ringing) | |
: | (Example 2: handset 3 is | |||
|
| |||
| n21 | 12 4 | ||
| P f N | b | not in collective ringing) | |
|
|
Enter the internal call number of the desired handset
(1 to 6) and confirm with B. If the handset is already in collective ringing mode it is excluded. If it was previously excluded it is reintegrated into the collective ringing.
Selecting a handset for ring priority
B#1 Start the setting procedure.
Enter the
o(➔ page 19).
O*22 The current setting is shown on the display:
:
n22 1
P fN b
(Example: handset 1 has ring priority)
oB Enter the internal call number of the desired handset (1 to 6) and confirm with B.
Setting the number of rings for ring priority
B#1 Start the setting procedure.
Enter the
o(➔ page 19).
O*6 The current setting is shown on the display:
:
n6 3
P fN b
(Example: 3 rings are set)
oB Enter the desired number of rings (two to nine) and con- firm with B.
52
