SmartBridges sB3416-02 manual Menu Item Menu Sub-items Description, Networking, Security, Wpa-Psk

		i n t e l l i g e n t w i r e l e s s				p l a t f o r m
	Menu Item	Menu Sub-items	Description
		Wireless Statistics	Displays	traffic		statistics		on	the
			Wireless side
			Shows the status of the association and
			the MAC of the AP associated with.
		Association Status	Shows the Link Status Graph for the
			associated link.
			Allows user to Enable or Disable DHCP
			Server
		DHCP	Allows user to Enable/Disable DHCP
			Relay (Note: DHCP Relay feature is
			only applicable for the 3416-03 model).
			Displays the DHCP List; if DHCP
	Networking	DHCP List	Server is Enabled
			Allows user to add entries to map Local
			Area Network IP Address (or port)
		IP/Port Forwarding	behind	the	NAT	to	a global		port
			accessible		through		the	wireless
			interface. User will be able to use this
			option only when the unit is configured
			in the NAT mode.
			Allows the user to view, add and delete
			or update static routes.
		Routing Table	Allows the user to Enable or Disable
			RIP running on the device. RIPv2 is run
			by default on the device.
		Bandwidth Control	Allows bandwidth management of						the
			wireless link
			Allows the user to set SSID, Enable or
			Disable	SSID		Suppressed,		select
		Wireless Settings	Internal or External antenna, configure
			Distance, select Data Rate, set
			Transmit Power,			set Country settings,
			Preamble and Slot time
			Security:
			Allows user to set the security mode for
			the device. User can choose Open
			System, Shared, or WPA-PSK.
	Radio		Open System / Shared Key:
			• Allows
			Allow user to turn on encryption
			using WEP at 64 or 128 bits and
			choose between Open Systems and
		Security	Shared Key.
			• WPA-PSK:
			This mode allows user to use WPA
			pre-shared key and cipher as TKIP
			or AES for client authentication.
airClient™ TOTAL 3416 User Guide							Page 17 of 74