SMC Networks 1560 user manual Quick Start Guide, Step-by-Step

Quick Start Guide

Contents

Quick Start Guide

In this section we have assembled a simple step-by-step procedure for installing and making the 1560-MBP unit operational. This discussion presumes that the application decisions such as Modbus Plus addressing and hierarchy, SCANport cable length, etc. have been addressed prior to this point.

Step-by-Step

The following steps will allow the 1560-MBP to be setup in the shortest period of time (the following steps refer to the Allen-Bradley drive implementation. Similar steps are followed when interfacing to other A-B Power Division products):

1Set the dip switches

The 1560-MBP dip switch positions are detailed in Section 3

2Mount the 1560-MBP on the DIN rail

See Appendix D for mounting instructions.

3Connect power to the 1560-MBP Refer to Section 3

4Setup the Drive hardware

Refer to the appropriate drive manual to connect control and power to the drive. This aspect of the drive installation is out of the scope of this manual.

5Setup the Drive parameters

See Appendix B of the manual to setup the drive parameters

6Install the SCANport cable between the drive and the 1560-MBP.

7Connect the Modbus Plus communication cable between the host system and the 1560-MBP. The procedure follows standard Modbus Plus cabling practices.

4