Power, input and output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods, Article
A. This equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D or nonhazardous locations only.
B. Warning – Explosion hazard – Substitution of components may impair suitability for Class I, Division 2.
C. Warning – Explosion hazard – When in hazardous locations, turn off power before replacing or wiring modules.
D. Warning – Explosion hazard – Do not disconnect equipment unless power has been switched off or the area is known to be nonhazardous.
9801 Camino Media
Suite 105
Bakersfield, CA 93311
(661)
(661)
44
