SMC Networks 1560 user manual Switch Position Description, Configuration Extension Blocks

Appendix C — Peer Cop Example

Contents

The 1560 MBP-1560 Dip Switch 2 Configuration is as follows:

Switch Position Description

1 On Set the 1560-MBP Node Address 6

2Off

3On

4Off

5Off

6Off

7	On	Enable Global Data Control from a host. Allows
		the Control and Reference words to be
		obtained from the Host PLC Global Data Block
8	On	Enables Drive fault on loss of Mobus Plus
		communication

The Host PLC (984) must also have its dip switches set to Node Address 7 and a proper Modbus Plus cable connected between the PLC and the 1560-MBP.

Configuration Extension Blocks

This section is a PLC printout (using Modsoft) that shows how the PLC’s Peer Cop is configured.

PEER COP
Timeout : 500 ms Total Links:1 Link Id:1 - Internal
	On Error : CLEAR			USED	20 OF		512 WORDS
	Access to Node : 6
	MODE	REFERENCE				LEN	TYPE	INDEX
	SPECIFIC INPUT			-
	SPECIFIC OUTPUT			-
	GLOBAL INPUT		100001-100016			1		1
	GLOBAL INPUT		400200-400208			9	BIN	2
	GLOBAL INPUT			-
	GLOBAL INPUT			-
	GLOBAL INPUT			-
	GLOBAL INPUT			-
	GLOBAL INPUT			-
	GLOBAL INPUT			-
TO ALL NODES ON LINK
GLOBAL OUTPUT		400100-400131			32 BIN

34