Changing the display item

Each time you press (AF/TA), the item changes as follows:

B AF on

B TA on

B AF TA on*

AF TA off b

*Select this to turn on both the AF and TA functions.

Tips

•Each time you press (AF) on the unit, the item changes as follows:

AF on y AF off

•Each time you press (TA) on the unit, the item changes as follows:

TA on y TA off

Notes

•When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF/TA) repeatedly until “AF TA off” appears.

•When “NO AF” and the station name flash alternately, it means that the unit cannot find an alternative station in the network.

•If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Press < or , while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI Seek” appears and no sound is heard). If the unit cannot find another frequency, “NO PI” appears, and the unit returns to the previously selected frequency.

Listening to a regional programme

The “REG on” (regional on) function lets you stay tuned to a regional programme without being switched to another regional station.

(Note that you must turn the AF function on.) The unit is factory preset to “REG on,” but if you want to turn off the function, do the following.

1 During radio reception, press (MENU), then press M or m repeatedly until “REG” appears.

2 Press , until “REG off” appears.

3 Press (ENTER).

Note that selecting “REG off” might cause the unit to switch to another regional station within the same network.

To return to regional on, select “REG on” in step 2.

Note

This function does not work in the United Kingdom and in some other areas.

Local link function (United Kingdom only)

The Local Link function lets you select other local stations in the area, even if they are not stored on your number buttons.

1 Press a number button of the unit that has a local station stored on it.2 Within five seconds, press the number button of the local station again.3 Repeat this procedure until the desired local station is received.

19