DSP (CDX-M700R only)

Setting the equalizer

You can select an equalizer curve for five music types (Rock, Vocal, Groove, Techno, and Custom).

You can store and adjust the equalizer settings for frequency and level.

Selecting the equalizer curve1 Press (SOURCE) to select a source (tuner, CD, or MD).2 Press (SOUND) repeatedly until “EQ” appears.3 Press < or , to select the desired equalizer curve.

Rock y Vocal y Groove y Techno y Custom y off

To cancel the equalizing effect, select “off.” After three seconds, the display returns to the normal playback mode.

Adjusting the equalizer curve1 Press (MENU).2 Press M or m repeatedly until “EQ Tune” appears.

3 Press (ENTER).

4 Press < or , to select the desired equalizer curve.

Rock y Vocal y Groove y Techno y Custom y off

5 Press (ENTER).

6 Press < or , to select the desired frequency.

62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16.0 kHz

7 Press M or m to select the desired level. The volume is adjustable by 1 dB steps from –12 dB to +12 dB.

To restore the factory-set equalizer curve, press (ENTER) for two seconds.

8 Press (MENU) twice.

When the effect setting is complete, the normal playback mode appears.

28