Getting StartedResetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press the reset button with a pointed object, such as a ballpoint pen.

Reset button

Note

Pressing the reset button will erase the clock setting and some memorised functions.

Security release settings

Do the following initial settings before you operate the unit for the first time, after replacing the car battery, or after resetting the unit.

Be sure to make these settings, otherwise the front panel remains disabled and you will be unable to operate the unit.

1 Press the reset button.

“Code in” appears.

2 Press the buttons on the card remote commander, and send the security code. Please refer to the supplied insert for details on the security code buttons.

When the code has been confirmed, the display changes to clock, and you can operate the unit normally.

Notes

•When you leave the car, take the card remote control with you.

•If you forget the security code, consult your Sony Service Center. Be sure to bring the card remote control with you.

Turning the unit on/offTurning on the unit

Press (SOURCE) or insert a CD in the unit. For details on operation, refer to page 10 (CD/MD) and page 16 (radio).

Turning off the unit

Press (OFF) to stop CD/MD playback or radio MW/LW reception (the key illumination and display remains on.)

Press (OFF) for two seconds to completely turn off the unit.

Note

If your car has no ACC position on the ignition key switch, be sure to turn the unit off by pressing (OFF) for two seconds to avoid car battery wear.

8