Basic operations of DABSearching for the Ensemble and Service— Automatic Tuning

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select “DAB.”3 Press and hold < or , until “Seek +” or “Seek –” appears.4 Press < or , to search the desired service.

Note

The “ ” indication flashes while the unit is searching for the Ensemble.

Selecting the Ensemble— Manual Tuning

If you know the channel number of Ensemble, follow the procedure below to tune in.

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select “DAB.”

3 Press M or m until “Ch. XXX” appears.4 Press M or m repeatedly until the desired channel number appears.

Tips

•More than one channel may broadcast the same Ensemble.

•If you select the Ensemble service but cannot receive it, the “ ” indication flashes.

Receiving the memorised services

Following procedure is available after presetting the service. For details on presetting the services, refer to “Presetting DAB services automatically,” (page 25) and “Presetting DAB services manually” (page 25).

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select “DAB.”

3 Press M or m repeatedly to select the preset service.

Tip

There is another way to receive the preset service. Press the number buttons ((1) to (6)) of the unit on which the desired service is stored.

The receiving mode of the DAB tuner is displayed according to the chart below:

Indication

Level

Receive mode

(flash)

0

cannot receive

 

 

 

 

1

poor reception

 

 

 

2 so-so

3 moderate

4 good reception

24