Presetting DAB services automatically — BTM

The BTM (Best Tuning Memory) function picks out DAB ensembles and automatically assigns the services within the ensembles to preset service numbers. The unit can preset up to 40 services. If services have been previously set, the BTM function operates under the following conditions:

•If you activate the BTM function while listening to a preset service, the unit will store detected services (by overwriting) only to preset numbers higher than that of the current present service.

•If you activate the function while listening to a service that is not preset, the unit will replace the contents of all preset numbers.

•In both cases above, if the unit detects a service that is identical to one already preset, the previously stored service remains unchanged and the newly detected service is not preset.

1 While listening to a DAB programme, press (MENU).2 Press M or m repeatedly until “BTM” appears.

3 Press (ENTER).

A beep sounds when the service is stored. After activating the BTM function, the unit tunes the service assigned in the preset memory 1 automatically.

Note

If the unit can only tune in a few services, the BTM function may not assign services to all the preset service numbers.

Presetting DAB servicesmanually — Manual Preset Memory

You can also preset DAB services manually or delete a service which is already preset. Note that up to 40 services (preset either by the BTM function or manually) can be preset to the unit’s memory.

1 While listening to a DAB programme, press (MENU).

2 Press M or m repeatedly until “PresetEdit” appears, then press (ENTER).3 Select the service and the preset number you want to preset.1Press < or , to select the service.2Press M or m to select the preset number.3Press (ENTER).4 Press M or m to select “Over Wrt.”

Each time you press m, the edit command changes as follows:

 

B Over Wrt

B Insert*

 

B Delete

 

 

 

 

 

 

 

 

 

 

*“Insert” does not appear if the maximum number of services (40) is already preset in memory.

To preset other services, repeat steps 3 and 4.

5 Press (ENTER).

25