Changing the sound and display settings

The following items can be set:

Set (setting)

•Clock (page 9)

•CT (Clock Time) (page 23)

•Beep — to turn the beeps on or off.

•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

—Select “norm” to use the rotary commamder as the factory-set position.

—Select “rev” when you mount the rotary commander on the right side of the steering column.

•English/Spanish/Portuguese/Swedish — to change the display language to English, Spanish, Portuguese or Swedish.

Dis (Display)

•Dimmer — to change the brightness of the display.

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display.

—Select “off” to deactivate Dimmer. •Contrast — to adjust the contrast if the

indications in the display are not recognisable because of the unit’s installed position.

•D.Info (Dual Information) — to display the clock and the play mode at the same time (on) or to display the information alternately (off).

•M.Dspl (Motion Display) — to turn the motion display on or off.

•A.Scrl (Auto Scroll)*1 (page 11)

Snd (Sound)

•EQ Tune*2 (Equalizer tuning) — to adjust the frquency and volume level of equalizer curve.

•Front HPF*2 (High pass filter for the front pre-output) — to select the cut-off frequency of the front pre-output.

•Rear HPF*2 (High pass filter for the rear pre- output) — to select the cut-off frequency of the rear pre-output.

•SUB LPF (Low pass filter for the subwoofer output)*2 — to select the roll off frequency of the subwoofer output.

1 Press (MENU).

2 Press M or m repeatedly until the desired item appears.

Each time you press m, the item changes as follows:

Example

Clock t CT t Beep t RM t English/ Spanish/Portuguese/Swedish t D.Info t SA

tDimmer t Contrast t M.Dspl t A.Scrl*1

tEQ tune*2 t Front HPF*2 t Rear HPF*2 t SUB LPF*2

*1 When no CD or MD is playing, this item will not appear.

*2 CDX-M700R only

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“Set,“ “Snd,“ “P/M“ (Play Mode) and “Dis“) by pressing M or m for two seconds.

3 Press , to select the desired setting (Example: on or off) or press < or , repeatedly to select the frequency (Example: off, 78 Hz or 125 Hz).

For the “Contrast” setting, pressing , makes the contrast higher, and pressing < makes the contrast lower.

4 Press (ENTER).

After the mode setting is completed, the display returns to normal play mode.

35