Press (MENU).
Adjusting the balance (BAL)

You can adjust the sound balance from the left and right speakers.

1 Press (SOURCE) to select a source (tuner, CD, or MD).

2 Press (SOUND) repeatedly until “BAL” appears.

3 Press < or , to adjust the balance. After three seconds, the display returns to the normal playback mode.

Adjusting the front and rear fader

1 Press (SOURCE) to select a source (tuner, CD, or MD).

2 Press (SOUND) repeatedly to select the “F” for the front speakers or “R” for the rear speakers.

3 Press < or , to adjust the volume of front/rear speakers.

After three seconds, the display returns to the normal playback mode.

Adjusting the cut-off frequency and the output volume level for the front/rear speakers

To match the characteristics of the installed speaker system, you can adjust the output volume level and select the cut-off frequency of the speakers.

Level

Cut-off frequency

 

Frequency (Hz)

1

2 Press M or m repeatedly to select “Front HPF” or “Rear HPF”

3 Press (ENTER).

4 Press < or , to select the cut-off frequency.

off y 78 Hz y 99 Hz y 125 Hz y 157 Hz y 198 Hz

5 Press M or m to adjust the volume level. The volume is adjustable by 1 dB steps from –12 dB to +12 dB.

Tip

When you lower the volume all the way down, “ATT” appears and the cut-off frequency is disabled.

6 Press (MENU) twice.

When the effect setting is complete, the normal playback mode appears.

30