Replacing the services in preset memories

Press M or m to select “Over Wrt” in step 4, then press (ENTER).

Adding the services in preset memories

Press M or m to select “Insert” in step 4, then press (ENTER).

Erasing the services in preset memories

Press M or m to select “Delete” in step 4, then press (ENTER).

Tip

There is another way to preset the service. After receiving the service, press the number buttons ((1) to (6)) of the unit until a beep sounds.

Tip

To check the name of the current component, ensemble or service, press (LIST) repeatedly until the respective list appears in the display. The name of the currently selected item flashes.

Changing the display item

When you press (LIST) once, the list selected last time appears.

Each time you press (LIST), the list changes as follows:

V

ENS (Ensemble list)

V

SRV (Service list)

V

CMP (Component list)

V

PRS (Preset list)

V

DAB (Cancel)

Listening to a DAB programme

Follow the procedure below to tune in a DAB programme manually.

You can also store DAB services in the unit’s memory for instant tuning (see “Presetting DAB services automatically (BTM)” on page 25).

1 While listening to a DAB programme, press (LIST) repeatedly until the Ensemble List appears.

2 Press M or m until the desired ensemble appears, then press (ENTER).3 Press (LIST) repeatedly to until the Service List appears.

4 Press M or m repeatedly until the desired service appears, then press (ENTER).

5 Press (LIST) repeatedly until the Component List appears.6 Press M or m until the desired component appears, then press (ENTER).
Automatic updating of the ensemble list

When you perform the BTM function for the first time, all the ensembles available in your area are automatically stored. When you perform the BTM function again, the contents of these lists are updated in accordance with the conditions described on page 25.

An ensemble is added to the respective list when it is received during Automatic Tuning or Manual Tuning but is unlisted.

An unlisted ensemble is also deleted from the respective list when:

•you select an ensemble from the list, but it cannot be received.

•you perform Automatic Tuning or Manual Tuning to receive a listed ensemble, service, or the component, but it cannot be received.

26