Types of trouble and how to correct trouble
Symptom | Cause and/or Corrective Actions |
An unknown picture is displayed on • If 10 minutes elapse after you set the POWER switch to | |
the screen. | CAMERA or DEMO MODE is set to ON in the menu settings |
| without a cassette inserted, your camcorder automatically |
| starts the demonstration. |
| c Insert a cassette and the demonstration stops. |
| You can also cancel DEMO MODE (p. 137). |
The picture is recorded in incorrect or | • NIGHTSHOT is set to ON. |
unnatural colours. | c Set it to OFF (p. 38). |
Picture appears too bright, and the | • NIGHTSHOT is set to ON in a bright place. |
subject does not appear on the | c Set it to OFF (p. 38). |
screen. | • The backlight function is active. |
| c Set it off (p. 37). |
The shutter does not sound. | • BEEP is set to OFF in the menu settings. |
| c Set it to MELODY or NORMAL (p. 137). |
A horizontal black band appears | • Set STEADYSHOT to OFF in the menu setting (p. 137). |
when shooting a TV screen or a |
|
computer screen. |
|
An external flash (optional) does not • The power of the external flash is off or the power source does
work. | not installed. |
| c Turn on the external flash or install the power source. |
| • Two or more external flashes are attached. |
| c Only one external flash can be attached. |
| • AUTO is selected in FLASH MODE in the menu settings while |
| recording in a bright place. |
| c Set it to ON (p. 137). |
| (continued on the following page) |
неисправностей устранение и Поиск Troubleshooting
235