10-3 Error Messages

This unit is equipped with a self-diagnosis function. If a problem is detected, it displays an error message in the time data display and on the video monitor.

If an error message appears, contact your Sony service representative.

10Chapter

Indications in the time data display

lower control panel lights, and an error message and error

 

If a problem is detected, the ALARM indicator in the

and Maintenance

code appear in the time data display area.

 

Inspection

12:34:47:12

 

ALARM indicator

Time data display area

Indications on the external monitor

The error message and code also appear superimposed on a monitor connected to the COMPOSITE VIDEO OUTPUT 3 (SUPER) connector, HDSDI OUTPUT 3 (SUPER) connector or SDI OUTPUT 3 (SUPER) connector. Depending on the error code, a secondary error message may appear indicating the location of the problem.

this case, they appear in the entire area of the time data display.

•Error messages with error codes are saved in NV-RAM (non-volatile memory) as an error log.

•In some cases the error message superimposed on the external monitor is slightly different from the message displayed in the time data display.

ERROR-01

REEL TROUBLE-1

Error message displays

•To display error messages and codes superimposed on the video monitor, it is necessary to set F5 (CHARA) in function menu page P04: MISC-1 to “ON”.

•Some error messages have no associated error codes. In

102 10-3 Error Messages